Cat6 cables are sometimes shielded, though retailers often aren’t clear when they are and aren’t, and Cat5e cables never have shielding. The other major difference is that Cat7 cables are always shielded, which helps reduce interference and crosstalk. Cat5e is rated for 1Gbps and bandwidths of 100MHz, Cat6 offers up to 10Gbps at up to 250MHz bandwidth, and Cat7 can go as high as 100Gbps with bandwidths up to 600MHz. The options you’re mostly likely to see are Cat5e (the ‘e’ stands for enhanced), Cat6 and Cat7.Īs you might have guessed, higher numbers tend to mean faster speeds. Reset the extender and go through the setup again.This is the most important thing to consider, as different ethernet categories can carry wildly varying speeds and levels of interference.Try setting it up via another method by referring to the Quick Installation Guide.If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.Make sure the extender is close to your router, preferably within 16 feet during setup, and away from large electrical appliances.If you set up via the Tether app or web management page, make sure you have entered the correct Wi-Fi password(s) for your home network router during setup.What should I do if the range extender can’t connect to my home network (the signal LED doesn’t turn solid on)? For channel settings, refer to your router’s user manual. In this case, change it to a band1 channel (36-48) or band4 channel (149-165), then try again. If it is set to auto or a DFS channel (52-64 or 100-140), 5 GHz connection may be unstable. Check the channel settings of your router’s 5 GHz network.Reboot the router and extender, then try again.If you use a dual-band extender but your router supports only the 2.4 GHz band, skip the 5 GHz band.Move the extender closer to your home router, preferably within 16 feet, then try again.Go to the wireless settings of your smartphone or laptop and make sure it can find your home network.Try rescanning networks, and double-check the list of scanned networks.What should I do if the range extender can’t find my home network? If the extender has been connected to a router, go to the router’s DHCP client list to obtain the extender’s current IP address. Use the IP address to access the extender.If you use a computer, make sure it is configured to obtain an IP address automatically.If your extender has an Ethernet port, connect your computer to the extender via an Ethernet cable, then try again.The default network name is TP-Link_Extender or TP-Link_Extender_2.4GHz/5GHz. Make sure your smartphone or computer is connected to the extender’s Wi-Fi.Verify that is correctly entered in the web browser.What should I do if I can’t access the web management page of the range extender? Turn off your cellular data and try again.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |